Solapac - Solar Hot Water Systems & Heating

Standard single-line solar pump station for mounting into a solar return flow. The pump station is either available with the controller RESOL DeltaSol® BS or DeltaSol® BS Pro. The most important hydraulic components for operation of a solar system are already mounted for an easy and quick installation. Manual vent Flowmeter ADG-set Security bracket with security valve and manometer Wall mounting with screws and dowels Filling and flushing connections Heat insulation Pre-assembled

Standard single-line solar pump station for mounting into a solar return flow. The pump station is either available with the controller RESOL DeltaSol® BS or DeltaSol® BS Pro. The most important hydraulic components for operation of a solar system are already mounted for an easy and quick installation.

Manual vent
Flowmeter
ADG-set
Security bracket with security valve and manometer
Wall mounting with screws and dowels
Filling and flushing connections
Heat insulation
Pre-assembled

Circulation pump:	WILO Star ST20/6 or ST20/7 (surcharge)
Size:	ca. 230 x 500 x 165 mm (incl. insulation)
Nominal size:	DN 15
Connections:	¾" IT
Material:	Fittings: brass Sealings: Viton / Teflon, Insulation EPP Flat sealings. Klingerit, max. 200 °C O-rings: Viton/EPDM, max. 180 °C Solar-non return valve: PPS, max. 180 °C
Adm. maximum temperature:	+ 120 °C, for a short term until +180 °C
Operation pressure:	maximum 8 bar
Spring pressure of non return valve:	200 mm WWS
Flowmeter:	1 ... 13 l/min

Solar Heating Grants